A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Rear axle casing

Ferrodo
Topic Author
Offline
New Member
Registered

11 Sep 2023 09:54 #250746 by Ferrodo

Rear axle casing was created by Ferrodo

Hi all , I’ve not posted on here before but I have a 2005 manual Jimny. It has just failed its mot on the rear axle mounts which have rusted and broken. I have been advised that welding is not an option.
So, any ideas where I can get a replacement casing? Trying to buy one from Suzuki but they are on back order.
regards
R

Attachments:

Please Log in or Create an account to join the conversation.

Busta
Offline
Platinum Member
Registered

12 Sep 2023 07:23 #250759 by Busta

Replied by Busta on topic Rear axle casing

For a replacement try asking on the facebook groups, there are a few Jimny breakers on there. But they can also easily be welded.

Please Log in or Create an account to join the conversation.

yakuza
Offline
Platinum Member
Registered

12 Sep 2023 07:45 #250760 by yakuza

Replied by yakuza on topic Rear axle casing

Even though I had a spare, I still welded mine as there is easy access. Must be pretty rotten if welding is not an option.

Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.

Please Log in or Create an account to join the conversation.

Time to create page: 0.129 seconds

Rear axle casing

Events Menu