A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Gen 3 - Engine Stalling at low revs - Service Bulletin
06 Jan 2025 06:07 - 06 Jan 2025 06:08 #259003
by yakuza
Havent seen it since the Liana engine came in. Also been wanting to check the PCV valve and the often clogged pipe going to the rear of the engine and the EGR something.
But these cold weather problems they are forgotten when spring comes and now the cold weather prevents me from finding motivation to go out. Luckily the frozen vaccum valve problems from last winter are gone.
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Replied by yakuza on topic Gen 3 - Engine Stalling at low revs - Service Bulletin
I have no idea.Is your idle control valve good and clean?
Havent seen it since the Liana engine came in. Also been wanting to check the PCV valve and the often clogged pipe going to the rear of the engine and the EGR something.
But these cold weather problems they are forgotten when spring comes and now the cold weather prevents me from finding motivation to go out. Luckily the frozen vaccum valve problems from last winter are gone.
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Last edit: 06 Jan 2025 06:08 by yakuza.
Please Log in or Create an account to join the conversation.
Time to create page: 0.118 seconds