A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Mounting new wheels; two questions
- thieuster
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
4 years 9 months ago #241636
by thieuster
Mounting new wheels; two questions was created by thieuster
As I posted on the forum: I've managed to scoop 5 new steel wheels and 5 new tyres. That brings up two questions:
- Correct torque. 120Nm?
- I use a standard garage jack to lift the car. What's the best spot where to place the jack before lifting the car. Under the chassis? Or...?
Please Log in or Create an account to join the conversation.
- Roger Fairclough
-
- Offline
- Platinum Member
-
Less
More
- Posts: 1560
- Thank you received: 225
4 years 9 months ago #241637
by Roger Fairclough
Replied by Roger Fairclough on topic Mounting new wheels; two questions
120 Nm is right.
Under each diff pumpkin. Yes the car will tip slightly but it's safer than under the chassis rails.
Roger
Under each diff pumpkin. Yes the car will tip slightly but it's safer than under the chassis rails.
Roger
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 10022
- Thank you received: 2005
4 years 9 months ago #241638
by Lambert
Temeraire, paladin, lawful good.
Bellerophon, thief, chaotic evil.
Leviathan, barbarian, chaotic good.
Replied by Lambert on topic Mounting new wheels; two questions
The official jack points on a gen3 are under the radius arms, there's a little pip about half way along that is to locate the jack pad from sliding.
Temeraire, paladin, lawful good.
Bellerophon, thief, chaotic evil.
Leviathan, barbarian, chaotic good.
Please Log in or Create an account to join the conversation.
- thieuster
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
4 years 9 months ago #241639
by thieuster
Replied by thieuster on topic Mounting new wheels; two questions
Thanks!
Nice job for tomorrow. Still a lot of wind. And it will continue tomorrow morning. I didn't go into the forest to check the damage; (my own Heath and Safety rules). Wednesday is a quiet day for that.
Nice job for tomorrow. Still a lot of wind. And it will continue tomorrow morning. I didn't go into the forest to check the damage; (my own Heath and Safety rules). Wednesday is a quiet day for that.
Please Log in or Create an account to join the conversation.
4 years 9 months ago #241643
by Soeley
For anyone else wondering or for future reference, the Gen4 is the same.
Black 2019 Jimny SZ5
Soeleys Jimny
Replied by Soeley on topic Mounting new wheels; two questions
The official jack points on a gen3 are under the radius arms, there's a little pip about half way along that is to locate the jack pad from sliding.
For anyone else wondering or for future reference, the Gen4 is the same.
Black 2019 Jimny SZ5
Soeleys Jimny
The following user(s) said Thank You: Lambert
Please Log in or Create an account to join the conversation.
4 years 9 months ago - 4 years 9 months ago #241655
by fordem
That's for the scissor's type service jack, see below for the garage jack - taken from the owner's manual
Replied by fordem on topic Mounting new wheels; two questions
The official jack points on a gen3 are under the radius arms, there's a little pip about half way along that is to locate the jack pad from sliding.
That's for the scissor's type service jack, see below for the garage jack - taken from the owner's manual
Last edit: 4 years 9 months ago by fordem. Reason: add text for clarity - no preview button
Please Log in or Create an account to join the conversation.
Time to create page: 0.136 seconds
