A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Gen 4 maintenance

  • Andy2640
  • Topic Author
  • Visitor
  • Visitor
    Public
12 Sep 2019 08:05 #213425 by Andy2640
Gen 4 maintenance was created by Andy2640
Any reccomendations for rubber seal care. Ya know...the stuff that protects from drying out and going green an stuff. Something that keeps them supple etc??

Thanks.

Please Log in or Create an account to join the conversation.

  • CC Baxter
  • Visitor
  • Visitor
    Public
12 Sep 2019 08:20 #213426 by CC Baxter
Replied by CC Baxter on topic Gen 4 maintenance
This form of maintenance seems to be an old fashioned idea now. I was taught to use Girling rubber grease (bright red it was), great stuff. Any petroleum based product will weaken rubber in the end and silicone can cause separation in bushes, etc. To my knowledge current thinking is to let rubber have its life and then replace.
Chris

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
12 Sep 2019 08:35 #213427 by Lambert
Replied by Lambert on topic Gen 4 maintenance
It's like the tyre dressing sprays many contain substances that shorten your tyres lifespan causing cracks and potentially bead leaks. I would save the money on treating them to go on replacement especially on things like window and door seals.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
The following user(s) said Thank You: Andy2640

Please Log in or Create an account to join the conversation.

  • Daniel30
  • Visitor
  • Visitor
    Public
12 Sep 2019 09:19 - 12 Sep 2019 09:20 #213428 by Daniel30
Replied by Daniel30 on topic Gen 4 maintenance

Andy2640 wrote: Any reccomendations for rubber seal care. Ya know...the stuff that protects from drying out and going green an stuff. Something that keeps them supple etc??

Thanks.


Funny you should mention this, just got this product on recommendation from the detailing site, got it for the Jim and my mini yet to get round to use it but it's on the list in the next couple of weeks :)
Last edit: 12 Sep 2019 09:20 by Daniel30.

Please Log in or Create an account to join the conversation.

More
12 Sep 2019 15:46 #213433 by mlines
Replied by mlines on topic Re:Gen 4 maintenance
If it's an oil seal then red rubber grease.

If it's an external seal such as a window seal the 303 Aerospace protectant

Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: Andy2640

Please Log in or Create an account to join the conversation.

More
12 Sep 2019 17:42 - 12 Sep 2019 17:42 #213434 by facade
Replied by facade on topic Re:Gen 4 maintenance
When the window rubbers on mine go green and the moss starts budding I clean it out with an old toothbrush, or scrubbing brush if I can find it. The rubbers lasted 18 years on the old one......:)

If it suddenly breaks, go back to the last thing that you did before it broke and start looking there :)
Last edit: 12 Sep 2019 17:42 by facade.
The following user(s) said Thank You: Andy2640

Please Log in or Create an account to join the conversation.

More
12 Sep 2019 19:28 #213445 by Hanslow
Replied by Hanslow on topic Re:Gen 4 maintenance
I've used Gummi Pflege for a while now. On my previous cars that had pillarless doors it was great for keeping the door seals supple but more importantly for me at the time it helped generate a bit of a barrier between the rubber and glass in freezing weather which meant I could easily open the doors when before they would have been frozen shut.

Whether or not it will work as well with rubber on metal I don't know, but I'll be treating mine periodically. It has its own applicator like a shoe polish system where you just push it on and drag and the sponge daubs it on as you go.

Odd name, but a good product.
The following user(s) said Thank You: Andy2640

Please Log in or Create an account to join the conversation.

  • Daniel30
  • Visitor
  • Visitor
    Public
12 Sep 2019 20:08 #213447 by Daniel30
Replied by Daniel30 on topic Re:Gen 4 maintenance
Yeah I have heard good things about it :)

Please Log in or Create an account to join the conversation.

More
13 Sep 2019 19:16 #213493 by Max Headroom
Replied by Max Headroom on topic Re:Gen 4 maintenance
Thats a +1 for me on the Gummi Pflege

I used it on my SAAB exclusively, and as already mentioned it helped stop door and glass seals from freezing themselves together in the depths of an icy winter


IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS
The following user(s) said Thank You: Andy2640

Please Log in or Create an account to join the conversation.

Time to create page: 0.150 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.