A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Settting differential backlash, side adjuster tension?
16 May 2018 10:43 #192748
by yakuza
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Replied by yakuza on topic Settting differential backlash, side adjuster tension?
I guess you understand why I caved in and just did this by feel and gefühl Ola...
But i have heard that a spring balance scale like the one from ebay above here is ok to do this.
But i have heard that a spring balance scale like the one from ebay above here is ok to do this.
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
The following user(s) said Thank You: OlaGB
Please Log in or Create an account to join the conversation.
- OlaGB
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
16 May 2018 12:45 #192754
by OlaGB
Yes, my conclusion is the same, wing it by feel
Comparing it against stock will probably tell me what i need to know anyway.
Replied by OlaGB on topic Settting differential backlash, side adjuster tension?
yakuza wrote: I guess you understand why I caved in and just did this by feel and gefühl Ola...
But i have heard that a spring balance scale like the one from ebay above here is ok to do this.
Yes, my conclusion is the same, wing it by feel

Comparing it against stock will probably tell me what i need to know anyway.
Please Log in or Create an account to join the conversation.
Time to create page: 0.155 seconds