A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
NEW Intermediate Prop - Rocklobster
- X88RED
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
08 Mar 2018 09:49 - 08 Mar 2018 10:06 #190114
by X88RED
NEW Intermediate Prop - Rocklobster was created by X88RED
Hello,
Does anyone know where I can get a new intermediate prop? - to work with my standard 2004 hard top Jimny gearbox and Rocklobster transfer box. A lot of people can not produce one due to the spline end that goes into the gearbox. Ideally I would like a new one rather than a refurbed one as other than the intermediate prop I am running all new props (from Jimny Bits).
Thanks!
Redmond
Does anyone know where I can get a new intermediate prop? - to work with my standard 2004 hard top Jimny gearbox and Rocklobster transfer box. A lot of people can not produce one due to the spline end that goes into the gearbox. Ideally I would like a new one rather than a refurbed one as other than the intermediate prop I am running all new props (from Jimny Bits).
Thanks!
Redmond
Last edit: 08 Mar 2018 10:06 by X88RED.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1934
- Thank you received: 554
08 Mar 2018 17:39 #190132
by Riccy
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic NEW Intermediate Prop - Rocklobster
You tried rockwatt/Richard Wattam yet?
I would be interested to know where to get a new one as well
I would be interested to know where to get a new one as well
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
- X88RED
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
08 Mar 2018 22:23 #190156
by X88RED
Replied by X88RED on topic NEW Intermediate Prop - Rocklobster
Yep, tried Rockwatt and he only does refurbed ones
Please Log in or Create an account to join the conversation.
14 Mar 2018 13:07 #190401
by yakuza
Norway -84 SJ410, 87 SJ413 lwb, 88 sammy trailer.
2005 Jimny M16A VVT, 235 Cooper Disco, 2" Trailmaster, ARB rear lck.
Replied by yakuza on topic NEW Intermediate Prop - Rocklobster
As I understand this is based on a SJ413/samurai drive shaft? I have dismantled 6 or 7 SJ's most from 1985 to 87 and none of them had any wear or slack in the joints on the drive shaft connecting the gearbox to the transfer box. The torque transmitted here is lower than the torque on the output shafts due to the rpm being higher. But the size is the same on input and output shafts so they doesn't get too much load i guess. the working angle is also less than on the output shafts.
I wouldn't worry much about using these, even used and not refurbished ones, if the joints feel good.
Actually cannot remember ever selling any of them used either so guess they do not fail.
Drive shafts between transfer box and rear/front axles are all sold and gone.
I wouldn't worry much about using these, even used and not refurbished ones, if the joints feel good.
Actually cannot remember ever selling any of them used either so guess they do not fail.
Drive shafts between transfer box and rear/front axles are all sold and gone.
Norway -84 SJ410, 87 SJ413 lwb, 88 sammy trailer.
2005 Jimny M16A VVT, 235 Cooper Disco, 2" Trailmaster, ARB rear lck.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1934
- Thank you received: 554
14 Mar 2018 13:38 #190402
by Riccy
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic NEW Intermediate Prop - Rocklobster
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
14 Jul 2018 21:16 #194287
by ahtr
My green laner build
2003 Jimny - M16 engine - 4.16 TC - Winch - Snorkel - 30x9.5 Maxxis MT-764 tyres on 15x7 ET-7 offset wheels - 4" lift - Rear floating axles and discs
Replied by ahtr on topic NEW Intermediate Prop - Rocklobster
I'm a few months late here, but euro car parts sell new props. The list price now isn't cheap. I got one for under £100, must have got lucky with a discount code and/or pricing error. They aren't stocked and it came straight from the supplier about 10 days after ordering.
I had a rough 413 prop and was going to get Jimny prop shortened as a spare but the ecp prop was cheap enough for me to take a chance on it.
Part number 662810050.
I had a rough 413 prop and was going to get Jimny prop shortened as a spare but the ecp prop was cheap enough for me to take a chance on it.
Part number 662810050.
My green laner build
2003 Jimny - M16 engine - 4.16 TC - Winch - Snorkel - 30x9.5 Maxxis MT-764 tyres on 15x7 ET-7 offset wheels - 4" lift - Rear floating axles and discs
Please Log in or Create an account to join the conversation.
Time to create page: 0.112 seconds
