A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Help identifying aftermarket wheels!
- Eyan
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
02 Dec 2016 19:51 - 02 Dec 2016 20:12 #175193
by Eyan
Help identifying aftermarket wheels! was created by Eyan
Hi all, first post here. I need a new wheel nut for my '01 Jimny. As it has aftermarket wheels (fitted before I bought it), Suzuki main dealer haven't got a clue, or either my local car parts place, though they said it was some sort of Mag nut. Can anyone identify these wheels so I can track down where to get a new wheel nut? Any help much appreciated. I am UK based, pics attached. Cheers!
Last edit: 02 Dec 2016 20:12 by Eyan.
Please Log in or Create an account to join the conversation.
02 Dec 2016 22:36 #175198
by Busta
Replied by Busta on topic Help identifying aftermarket wheels!
I can't help you with the make but if you can't find and exact match there will be other wheel nuts that fit the taper (pressumably 60 degrees) and the shoulder. You will need to take some measurements though- thread pitch and shoulder diameter mainly.
2 minutes on google brings up this which looks fairly close: www.raceways.co.uk/USA_3-4''_Hex_Bulge_ET_alloy_wheel_Nut.htm
2 minutes on google brings up this which looks fairly close: www.raceways.co.uk/USA_3-4''_Hex_Bulge_ET_alloy_wheel_Nut.htm
Please Log in or Create an account to join the conversation.
02 Dec 2016 22:39 #175199
by Busta
Replied by Busta on topic Help identifying aftermarket wheels!
The last 2 here look right too.
www.performancealloys.com/nuts-results.a...ad=13&hex=19mm&tab=5
www.performancealloys.com/nuts-results.a...ad=13&hex=19mm&tab=5
Please Log in or Create an account to join the conversation.
- helijohn
- New Member
-

Public
Less
More
- Thank you received: 0
04 Dec 2016 21:34 #175268
by helijohn
Nice find Busta.
I hate it when we can't get at the previous owner to find things like this.
I assume the spare does not have such a lugnut.
Replied by helijohn on topic Help identifying aftermarket wheels!
Busta wrote: The last 2 here look right too.
www.performancealloys.com/nuts-results.a...ad=13&hex=19mm&tab=5
Nice find Busta.
I hate it when we can't get at the previous owner to find things like this.
I assume the spare does not have such a lugnut.
Please Log in or Create an account to join the conversation.
04 Dec 2016 21:44 #175269
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic Help identifying aftermarket wheels!
How many do you need, I think I have at least one
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
- Eyan
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
05 Dec 2016 19:22 #175299
by Eyan
Replied by Eyan on topic Help identifying aftermarket wheels!
Thanks for the help everyone. Just need one! I can't get at the spare without braking into the holder, only now realise I didn't get a key to it when I bought it...
Please Log in or Create an account to join the conversation.
Time to create page: 0.134 seconds
