A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Gearbox seal
- mikegarcar
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
10 years 1 month ago #172662
by mikegarcar
Gearbox seal was created by mikegarcar
Does anybody know what size of reference the gearbox seal is on the output to the transfer box is I rang my local Suzuki dealer and he says he can't see one only the transfer box seal
Thanks
Thanks
Please Log in or Create an account to join the conversation.
- Ally
- New Member
-
Less
More
- Thank you received: 0
10 years 1 month ago #172676
by Ally
Replied by Ally on topic Gearbox seal
Suzuki should have a parts diagram on the computer, Just changed mine and prop shaft as it was the culprit leaking at the UJ.
Think Suzuki part NO is 24780 - 83010
Think Suzuki part NO is 24780 - 83010
Please Log in or Create an account to join the conversation.
10 years 1 month ago #172677
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Gearbox seal
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Time to create page: 0.079 seconds
