A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Need help today :)
- davert85
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
10 years 3 months ago #171049
by davert85
Need help today :) was created by davert85
Hello all
currently fitting my winch and 2nd battery set up to the Jim. Unfortunately the battery I have for the tray is too tall and I can't close the bonnet. What size (height etc not amps) have others gone for, brand etc? Hoping to get another battery as soon as the shops open and get this all done today. Any help greatly appreciated. Feel free to leave comments after today just incase I don't get it done and still need the help for next time.
Thanks in advance
David
Thanks in advance
David
Please Log in or Create an account to join the conversation.
- Daniel30
- New Member
-
Less
More
- Thank you received: 0
10 years 3 months ago #171052
by Daniel30
Replied by Daniel30 on topic Need help today :)
can't you measure the height that you need and get one accordingly ? you might be governed by what shops are open today anyway so you will have to get what ever they sell brand wise unless your going to leave it until Monday?
Please Log in or Create an account to join the conversation.
- davert85
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
10 years 3 months ago #171053
by davert85
Replied by davert85 on topic Need help today :)
That's what Iv done, measured it. Halfords and wilco are both open today so they will be my best bet. It's quite a small battery Iv got but not small enough it would seem haha. Luckily they said I can swap it so Iv not wasted 75 quid
Please Log in or Create an account to join the conversation.
- Daniel30
- New Member
-
Less
More
- Thank you received: 0
10 years 3 months ago - 10 years 3 months ago #171054
by Daniel30
Replied by Daniel30 on topic Need help today :)
don't suppose you can drive the jim down there is it in bits? I don't know about second trays etc but would it be the same as the jim battery think i have read people using the same batteries with a two battery set up, sorry not much help just floating some ideas about
Last edit: 10 years 3 months ago by Daniel30.
Please Log in or Create an account to join the conversation.
- gusthegorilla
- New Member
-
Less
More
- Thank you received: 0
10 years 3 months ago #171056
by gusthegorilla
Replied by gusthegorilla on topic Need help today :)
I can't visualise the set-up you have for your second battery, Dave, but is it possible to remount the tray a little bit lower ?
Attack the problem from the other side, as it were :whistle:
Gus
Attack the problem from the other side, as it were :whistle:
Gus
Please Log in or Create an account to join the conversation.
Time to create page: 0.084 seconds
