A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Weird problem
- wombat
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
10 years 4 months ago #169740
by wombat
Weird problem was created by wombat
Set off to work this morning, heater on full cold with aircon off. After a few minutes an ice cold fog came out of the air vents for about 5 minutes. At first i panicked as i thought it was smoke until i felt how cold it was. Weather conditions were light drizzle but very humid.Any thoughts ?
Cheers, Ian
Cheers, Ian
Please Log in or Create an account to join the conversation.
- helijohn
- New Member
-
Less
More
- Thank you received: 0
10 years 4 months ago #169742
by helijohn
Replied by helijohn on topic Weird problem
Had something a bit like it years ago in another motor, there was water in the intake. Had something else like it back in the '70s and it was a leaking heater rad core causing it. Apart from that I have no idea. :huh: :dry:
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 10024
- Thank you received: 2004
10 years 4 months ago #169743
by Lambert
Temeraire, paladin, lawful good.
Bellerophon, thief, chaotic evil.
Leviathan, barbarian, chaotic good.
Replied by Lambert on topic Weird problem
I have no idea but as a guess does the air conditioning system work, could it have been refrigeration gas escaping?
Temeraire, paladin, lawful good.
Bellerophon, thief, chaotic evil.
Leviathan, barbarian, chaotic good.
The following user(s) said Thank You: wombat
Please Log in or Create an account to join the conversation.
- wombat
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
10 years 4 months ago #169836
by wombat
Replied by wombat on topic Weird problem
apparently this can happen occasionally on planes when coming into land, so assuming it could have been humidity/temperature didderence between outside and inside
Please Log in or Create an account to join the conversation.
Time to create page: 0.090 seconds
