A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
help please
- campbell
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
10 years 5 months ago #168377
by campbell
help please was created by campbell
Hi all have a 2004 jimny me and mate just put new clutch in all went well but when ticking over the a little squeak in till u push clutch it goes???????? Any ideas or help I appreciate
Please Log in or Create an account to join the conversation.
- OllieNZ
- New Member
-
Less
More
- Thank you received: 0
10 years 5 months ago #168379
by OllieNZ
Replied by OllieNZ on topic Re:help please
Did you change the release bearing?
Please Log in or Create an account to join the conversation.
- campbell
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
10 years 5 months ago #168382
by campbell
Replied by campbell on topic Re:help please
Yeah we did??????
Please Log in or Create an account to join the conversation.
10 years 5 months ago #168463
by kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Replied by kirkynut on topic Re:help please
It sounds like the release bearing. It might go with use.
Kirkynut
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
- campbell
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
10 years 5 months ago #168584
by campbell
Replied by campbell on topic Re:help please
Will it do damage if I leave it??
Please Log in or Create an account to join the conversation.
- mickt
- New Member
-
Less
More
- Thank you received: 0
10 years 5 months ago #168600
by mickt
Replied by mickt on topic help please
Should not if fitted correctly. The noise will be annoying though.
Please Log in or Create an account to join the conversation.
Time to create page: 0.101 seconds
