A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Setting up my Jimny
- Daraji91
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
21 Apr 2016 06:16 #165560
by Daraji91
Setting up my Jimny was created by Daraji91
Hey guys hope all is well!.
I'm new to the jimny world recently sold my 2010 Wrangler to get a 2008 jimny " I LOVE THE POTENTIAL the JIMNY HAS :woohoo: "
About a month from buying my used jimny my 1.3 engine Blew out due to the jerk who sold it to me for never taking care of the car.
Oh well I swapped the engine to a zoooki 1.6 M16A Liana engine and the build is under way with a new paint job aswell.
Now Im looking for the following to gain some HP + The whole tire and rim size is killing me!
Im looking for a Proper:-
COLD AIR INTAKE
COMPLETE EXHAUST SYSTEM
Any Advice which site has some sick Jimny Aftermarket Bits?
Now for the whole rim and tire size.
Unfortunately I haven't been capable of finding 15" jimny wheels here in Dubai so the only options I have are
1- To go with the 15" 3 spoke Aluminium Rims ( which I heard are Bad/Dreadful ) cause major death wobble
2- Stick with the current 15" steel rims but maybe throw in a 1.5" to 2" spacer
3- To change my rims from 15 " to 16" rims which im really keening on doing " please keep in mind that my jimny is not lifted but i have future plans of lifting it to 2" " so what is the best offset for a 16" rim and tire size for a stock jimny?
Thanks In advance guys!!
I'm new to the jimny world recently sold my 2010 Wrangler to get a 2008 jimny " I LOVE THE POTENTIAL the JIMNY HAS :woohoo: "
About a month from buying my used jimny my 1.3 engine Blew out due to the jerk who sold it to me for never taking care of the car.
Oh well I swapped the engine to a zoooki 1.6 M16A Liana engine and the build is under way with a new paint job aswell.
Now Im looking for the following to gain some HP + The whole tire and rim size is killing me!
Im looking for a Proper:-
COLD AIR INTAKE
COMPLETE EXHAUST SYSTEM
Any Advice which site has some sick Jimny Aftermarket Bits?
Now for the whole rim and tire size.
Unfortunately I haven't been capable of finding 15" jimny wheels here in Dubai so the only options I have are
1- To go with the 15" 3 spoke Aluminium Rims ( which I heard are Bad/Dreadful ) cause major death wobble
2- Stick with the current 15" steel rims but maybe throw in a 1.5" to 2" spacer
3- To change my rims from 15 " to 16" rims which im really keening on doing " please keep in mind that my jimny is not lifted but i have future plans of lifting it to 2" " so what is the best offset for a 16" rim and tire size for a stock jimny?
Thanks In advance guys!!
Please Log in or Create an account to join the conversation.
21 Apr 2016 14:07 #165576
by kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Replied by kirkynut on topic Setting up my Jimny
Welcome along!
There's not much in the way of engine tuning products for the Jimny, so no off the shelf cold air intake to my knowledge. Perhaps the Japanese have but the language issue is so big it makes it hard. Try Google translate for "Cold Air Intake" into Japanese and Google the results. Prepare for hours of trawling.
Look here for 16" wheels www.apio.jp/ . Alternatively the wider Grand Vitara or long wheel base Vitaras had perfect 16" wheels but they are not that exciting in my opinion. I've had some in the past.
The smallest relevant tyres for 16" wheels are 215/80/16 but I think you will need a 3" lift.
The Japanese also have some cool 15" wheels. Google Suzuki Jimny alloy wheels in Japanese using Google translate too. The shipping and taxes are what has stopped me!
Standard offset is about +et 10mm from memory and going to et 0 or minus puts the wheels further out. Look at Jimnybits.co.uk for some offset steel wheels or spacers.
An exhaust will need to be custom built but make sure it retains some back pressure or you'll actually lose power and create excessive noise.
Hope I've helped.
Kirkynut
There's not much in the way of engine tuning products for the Jimny, so no off the shelf cold air intake to my knowledge. Perhaps the Japanese have but the language issue is so big it makes it hard. Try Google translate for "Cold Air Intake" into Japanese and Google the results. Prepare for hours of trawling.
Look here for 16" wheels www.apio.jp/ . Alternatively the wider Grand Vitara or long wheel base Vitaras had perfect 16" wheels but they are not that exciting in my opinion. I've had some in the past.
The smallest relevant tyres for 16" wheels are 215/80/16 but I think you will need a 3" lift.
The Japanese also have some cool 15" wheels. Google Suzuki Jimny alloy wheels in Japanese using Google translate too. The shipping and taxes are what has stopped me!
Standard offset is about +et 10mm from memory and going to et 0 or minus puts the wheels further out. Look at Jimnybits.co.uk for some offset steel wheels or spacers.
An exhaust will need to be custom built but make sure it retains some back pressure or you'll actually lose power and create excessive noise.
Hope I've helped.
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
Time to create page: 0.072 seconds
