A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Engine oil
- 1066Boy
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
10 years 7 months ago #164163
by 1066Boy
Engine oil was created by 1066Boy
Hi all, i have got to top up the oil in my girlfriends Jimny.
Its the older non vvt with 60k on the clock.
What grade should i top up with?
Its the older non vvt with 60k on the clock.
What grade should i top up with?
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Less
More
- Posts: 3111
- Thank you received: 706
10 years 7 months ago #164166
by jackonlyjack
Replied by jackonlyjack on topic Engine oil
it depends what's in it already
i run 10/40 semi synthetic
when did the oil and filter last get changed
Jack
i run 10/40 semi synthetic
when did the oil and filter last get changed
Jack
Please Log in or Create an account to join the conversation.
- 1066Boy
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
10 years 7 months ago #164171
by 1066Boy
Replied by 1066Boy on topic Engine oil
No idea whats in it. She has had had it about 9 months.
Bought it from a garage and it had a service just before she got it.
It will be having another service in a few months but checked it
today and its down near the low mark. Will it matter if i top it up
with 10/40 semi regardless of whats in already? :blink:
Bought it from a garage and it had a service just before she got it.
It will be having another service in a few months but checked it
today and its down near the low mark. Will it matter if i top it up
with 10/40 semi regardless of whats in already? :blink:
Please Log in or Create an account to join the conversation.
10 years 7 months ago #164176
by Busta
No, it will all mix in.
Replied by Busta on topic Engine oil
1066Boy wrote: Will it matter if i top it up
with 10/40 semi regardless of whats in already? :blink:
No, it will all mix in.
The following user(s) said Thank You: 1066Boy
Please Log in or Create an account to join the conversation.
Time to create page: 0.079 seconds
