A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Track rod ends
- jimothy
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
10 Feb 2016 18:03 #162172
by jimothy
Track rod ends was created by jimothy
Hi guys can anyone tell me what track rod ends I need for my 07 jimny I want to replace all of them as the car has done 150,000 miles and does suffer from the dreaded wobble.
Please Log in or Create an account to join the conversation.
- mickt
- New Member
-

Public
Less
More
- Thank you received: 0
10 Feb 2016 19:22 #162179
by mickt
Replied by mickt on topic Track rod ends
The jimny shop sells them.
Please Log in or Create an account to join the conversation.
- jim
- New Member
-

Public
Less
More
- Thank you received: 0
10 Feb 2016 22:16 #162203
by jim
Replied by jim on topic Track rod ends
I have just fitted mine from the big jimny shop. After doing kingpins there was only a slight tremor at 50 now the track rods have been changed I don't have any. Make sure you get a left handed and a right handed track rod for each side as the threads are handed.
Please Log in or Create an account to join the conversation.
11 Feb 2016 08:41 #162211
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Track rod ends
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Time to create page: 0.112 seconds
