A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Part fitment
11 years 1 week ago #156039
by weecorey
Part fitment was created by weecorey
I have a 2005 Jimny which needs a complete front end, bonnet, bumper, both wings, headlights and I'd like to change the inner wings (the large part that surrounds the engine and houses the head lamps)
What difference is there in the later model Jimny's? Can I use parts from the later model?
Thanks in advance
What difference is there in the later model Jimny's? Can I use parts from the later model?
Thanks in advance
Please Log in or Create an account to join the conversation.
- Basketcase
- New Member
-
Less
More
- Thank you received: 0
11 years 1 week ago #156053
by Basketcase
Replied by Basketcase on topic Part fitment
You should be able to use upto about 14 reg where the grill was made not part of the bonnet not sure what year it came in though exactly
Please Log in or Create an account to join the conversation.
11 years 1 week ago #156061
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic Part fitment
The chassis ends are in a slightly different position on a newer jimny, but you could space it out,
If your are looking for parts I have a 2004 54 plate black and silver jimny with most front end parts if you are interested?
If your are looking for parts I have a 2004 54 plate black and silver jimny with most front end parts if you are interested?
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
Time to create page: 0.079 seconds
