A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Starting and choke question.

  • Al.
  • Topic Author
  • New Member
  • New Member
More
11 years 3 weeks ago #154272 by Al.
Starting and choke question. was created by Al.
So I have to questions,

When I start my jimny up, the engine ideals at 2300 rpm, and stays there for ages. It will drop to about 1200 when hot. If this about right on the new jimny. I also have to say, when stating, I have to turn the engine over for 3 to 7 seconds before it starts.

Also, my brake peddle is always harder than any other car I've driven, anyone else notice any difference.

Please Log in or Create an account to join the conversation.

More
11 years 3 weeks ago #154274 by j999pre
Sounds far too high. You could have a air leak and it could be on the vacuum side somewhere so that the servo isn't getting enough help from the vacuum, if it's under warranty take it back!

Gold Jimny the best colour (sold) :(

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

  • fozzie
  • New Member
  • New Member
More
11 years 3 weeks ago #154275 by fozzie
Replied by fozzie on topic Starting and choke question.

j999pre wrote: Sounds far too high. You could have a air leak and it could be on the vacuum side somewhere so that the servo isn't getting enough help from the vacuum, if it's under warranty take it back!


That sounds like good sense. A few years ago I had an air leak on my Audi TT which caused a loss of engine power and the brakes were awful.

Please Log in or Create an account to join the conversation.

Time to create page: 0.071 seconds
Joomla template by a4joomla

We use cookies

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.
CookieHint and Consent by reDim GmbH (Opens in a new window)