A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
VDO additional guages
- skywalker65
-
Topic Author
- Offline
- Premium Member
-
Less
More
- Posts: 141
- Thank you received: 20
11 years 1 month ago #153390
by skywalker65
If in doubt ...... Flat out ??
VDO additional guages was created by skywalker65
Hi All,
Quite like the idea of installing some of the above in to the Jimny. Possibly Oil temp. Amps, Volt meter haven't quite decided yet.
Couple of questions.
Does any one do a nice dash mounted pod for housing such things ? Possibly for 3 guages. Any other recommendations for siting guages welcome.
What about mounting sensors for the guages in the engine dept ?
What have folk used to install the various sensors around the engine etc
And finally ..... Does anybody do specific kits for the Jimny ?
Thanks
Quite like the idea of installing some of the above in to the Jimny. Possibly Oil temp. Amps, Volt meter haven't quite decided yet.
Couple of questions.
Does any one do a nice dash mounted pod for housing such things ? Possibly for 3 guages. Any other recommendations for siting guages welcome.
What about mounting sensors for the guages in the engine dept ?
What have folk used to install the various sensors around the engine etc
And finally ..... Does anybody do specific kits for the Jimny ?
Thanks
If in doubt ...... Flat out ??
Please Log in or Create an account to join the conversation.
- helijohn
- New Member
-
Less
More
- Thank you received: 0
11 years 1 month ago #153499
by helijohn
Replied by helijohn on topic VDO additional guages
I got one, two and three gauge pods off ebay. For my voltmeter I use adjustable ones so I can site them most anywhere.skywalker65 wrote: Couple of questions.
Does any one do a nice dash mounted pod for housing such things ? Possibly for 3 gauges. Any other recommendations for siting gauges welcome.
Please Log in or Create an account to join the conversation.
11 years 1 month ago #153515
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic VDO additional guages
No eBay APP ID and/or Cert ID defined in Kunena configurationWhy not go modern? Put in a small flat screen display and feed it from the engine management info.
Or build your own
Or build your own
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- skywalker65
-
Topic Author
- Offline
- Premium Member
-
Less
More
- Posts: 141
- Thank you received: 20
11 years 1 month ago #153527
by skywalker65
If in doubt ...... Flat out ??
Replied by skywalker65 on topic VDO additional guages
Thanks for the help guys. John I'll have a look on EBay for some pods. Thanks Martin for the idea of the digital guage.
Unfortunately I'm old school lol .
Like an analogue style guage
Unfortunately I'm old school lol .
Like an analogue style guage
If in doubt ...... Flat out ??
Please Log in or Create an account to join the conversation.
- helijohn
- New Member
-
Less
More
- Thank you received: 0
11 years 1 month ago #153529
by helijohn
Replied by helijohn on topic VDO additional guages
No eBay APP ID and/or Cert ID defined in Kunena configuration
I bought this very recently for my Pajero Junior.
?
I am exactly the same and I like good round dials.skywalker65 wrote: Unfortunately I'm old school lol .
Like an analogue style gauge
I bought this very recently for my Pajero Junior.
?
Please Log in or Create an account to join the conversation.
Time to create page: 0.111 seconds
