A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
knocking noise when setting off
- Adz6660
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
11 years 9 months ago #136005
by Adz6660
knocking noise when setting off was created by Adz6660
I've got a clunk or knock when setting off checked all the radius arm bushes they are fine anyone had anything similar thanks in advance adz
Please Log in or Create an account to join the conversation.
- TomDK
- New Member
-
Less
More
- Thank you received: 0
11 years 9 months ago #136006
by TomDK
Replied by TomDK on topic knocking noise when setting off
Check your transferbox mounts.
Please Log in or Create an account to join the conversation.
- Jimny-Dave
- New Member
-
Less
More
- Thank you received: 0
11 years 9 months ago - 11 years 9 months ago #136036
by Jimny-Dave
Replied by Jimny-Dave on topic knocking noise when setting off
Sounds like the gearbox 'engine' mount to me, mine delaminated and caused a knocking noise (like a 'fluttering' I'd say) when setting off or under load offroad -
That's the new one going in under the rear of the gearbox, although Suzuki refer to it as the engine mount...
( Available here in the BigJimny Store )
That's the new one going in under the rear of the gearbox, although Suzuki refer to it as the engine mount...
( Available here in the BigJimny Store )
Last edit: 11 years 9 months ago by Jimny-Dave.
Please Log in or Create an account to join the conversation.
Time to create page: 0.074 seconds
