A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Snorkels

More
11 Apr 2009 22:25 #553 by ooky_123
Snorkels was created by ooky_123
I posted on Difflock too and had a few replies, but I thought I would post here too.
After crossing a number of fairly deep ( 4 - 5 foot deep ) rivers and puddles, i think a snorkel is in order. so far, we have nor stalled out or even dampened the airfilter so we are going to quit while we are ahead and get a snorkel fitted.

Can anyone recommend a good supplier ? or is anyone else thinking of getting one we could get a bulk order ?

Former owner of Little "Ooky", who has now started a new life in Shetland

Please Log in or Create an account to join the conversation.

More
12 Apr 2009 06:01 #555 by mlines
Replied by mlines on topic Re:Snorkels
I could buy some to sell through the BigJimny shop, I would suspect the dollar rate and import tax would do some damage to the price, should I enquire?

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
12 Apr 2009 07:47 #556 by ooky_123
Replied by ooky_123 on topic Re:Snorkels
suppose it could be worth it if a few people want one.

My husband travels a lot on buisness, but im not sure he could bring one of these back on a buisnes trip.B)

Former owner of Little "Ooky", who has now started a new life in Shetland

Please Log in or Create an account to join the conversation.

More
12 Apr 2009 18:55 #559 by Rich-lj
Replied by Rich-lj on topic Re:Snorkels
I was looking for a snorkel for mine too, but I have decided to go down the cheaper route of home made. We do a lot of laning and stuff gets ripped off, smashed, dented etc in some of the gnarly lanes we like to do. A few other off roaders I know have used plastic drain pipe and elbows with bonded joins and made a good job of them so they don't look cheap and nasty and fit tight to the body. If it gets broken then its only a few quid for a new bit of pipe from B&Q as opposed to over a hundred quid for a propper snorkel.

Please Log in or Create an account to join the conversation.

More
13 Apr 2009 04:42 #563 by ooky_123
Replied by ooky_123 on topic Re:Snorkels
The DIY route was an option, but I want one that looks good and is functional. Yes, I know the plastic drainpipe is just as effective but... well ..... no !

Former owner of Little "Ooky", who has now started a new life in Shetland

Please Log in or Create an account to join the conversation.

More
13 Apr 2009 13:16 #566 by mlines
Replied by mlines on topic Re:Snorkels
I have just had it confirmed in an email that I can supply Jimny snorkels - I will talk further with the company this week to confirm a price and will let you know so you can tell me if it is worth doing

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
13 Apr 2009 18:29 #576 by ooky_123
Replied by ooky_123 on topic Re:Snorkels
Well im pretty much sold on the Airtek one. If you can do the donkey work and get me one, ill happily buy it through you

Former owner of Little "Ooky", who has now started a new life in Shetland

Please Log in or Create an account to join the conversation.

More
13 Apr 2009 18:58 #577 by mlines
Replied by mlines on topic Re:Snorkels
Thats the one I am looking into. The cheapest AirTek I have found is £199 + VAT + P+P which is the target I have to match or beat (otherwise its worth you going elsewhere - although I understand delivery time is a factor - if its cheap but you have to wait 6 weeks whilst it wends its way on a boat from Australia than thats no good either)

Should know what can be done later this week

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
14 Apr 2009 05:07 #578 by ooky_123
Replied by ooky_123 on topic Re:Snorkels
sounds good. cannot wait :)

Former owner of Little "Ooky", who has now started a new life in Shetland

Please Log in or Create an account to join the conversation.

More
14 Apr 2009 11:39 #581 by mlines
Replied by mlines on topic Re:Snorkels
It looks to be that I could sell them on at £199 INC VAT (ie. you get a 15% discount on the £199 EX. VAT price). On top of this would be postage which I am told is roughly £12 (or free if you collect from Reading!)

Any confirmed takers? (there is a further discount break point at 9 items but I don't think we will hit this - I am taking a financial risk myself on meeting a lower break point)


Just sorting out how any warranty would work with the distributor

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
14 Apr 2009 11:57 #582 by ooky_123
Replied by ooky_123 on topic Re:Snorkels
As long as it doesnt look like a piece of drainpipe, sign us up for one.

Can you get a picture of the proposed item ?

Former owner of Little "Ooky", who has now started a new life in Shetland

Please Log in or Create an account to join the conversation.

More
14 Apr 2009 14:26 #583 by mlines
Replied by mlines on topic Re:Snorkels
I have confirmed the price at £199 + postage (£12.50)

For more details of the fitting to a Jimny (and pictures) see here

www.difflock.com/magazine/Workshop_and_S...norkel_printer.shtml

For more details on this specific snorkle range see here

www.tjmproducts.co.uk/index.php?page=sho...virtuemart&Itemid=29

The distributor will get the first pair to me on Thursday with the rest being shipped from Australia so the first couple of orders will be delivered (or available to collect) after Thursday. I will properly set up and open the BigJimny shop this evening to take orders via Paypal.

I hope this gives something to the Jimny community as its a bit of a finance gamble for me!

DO NOT ORDER UNTIL I POST A "YOU CAN ORDER NOW" MESSAGE AS YOU MAY JUST CATCH THE WEBSITE AS IT IS BEING CONFIGURED!!!

Martin

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

Time to create page: 0.177 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.