A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Smoke on cold startup

  • Huskynose
  • Topic Author
  • New Member
  • New Member
More
12 years 3 months ago #121166 by Huskynose
Smoke on cold startup was created by Huskynose
Good day Peeps,

am new to this forum, so forgive me if I break any rules.... B)

SWMBO's Jimny (MY2000) is very smoky on startup.
It belges blue smoke, which stops after a few moments.
Only does it on cold starts, rest of the day it's fine.
I have noticed the oil on the dipstick, when checked with cold engine, is about 1/2 an inch above the full mark.
Could it be the previous owner has overfilled the engine, and could this be the cause of the smoke?

Please Log in or Create an account to join the conversation.

  • Jimny_Aus
  • New Member
  • New Member
More
12 years 3 months ago #121167 by Jimny_Aus
Replied by Jimny_Aus on topic Smoke on cold startup
could be a mixture of that and worn oil ring's on your pistons... has the engine done lots of miles...

Please Log in or Create an account to join the conversation.

  • Huskynose
  • Topic Author
  • New Member
  • New Member
More
12 years 3 months ago #121168 by Huskynose
Replied by Huskynose on topic Smoke on cold startup
Don't know in miles, but about 100k in km's ...

Please Log in or Create an account to join the conversation.

  • JlxJimny
  • New Member
  • New Member
More
12 years 3 months ago #121170 by JlxJimny
Replied by JlxJimny on topic Smoke on cold startup
Mine blows a puff of smoke on a cold startup too. Mechanic reckons its probably valve stem seals.

Please Log in or Create an account to join the conversation.

  • ZookFastback
  • New Member
  • New Member
More
12 years 3 months ago #121178 by ZookFastback
Replied by ZookFastback on topic Smoke on cold startup

JlxJimny wrote: Mine blows a puff of smoke on a cold startup too. Mechanic reckons its probably valve stem seals.


That was what I found with mine and fitting the stem seals fixed it, no more puffs of smoke when cold.

Please Log in or Create an account to join the conversation.

  • helijohn
  • New Member
  • New Member
More
12 years 3 months ago #121209 by helijohn
Replied by helijohn on topic Smoke on cold startup
No eBay APP ID and/or Cert ID defined in Kunena configurationTry this.

Please Log in or Create an account to join the conversation.

Time to create page: 0.094 seconds
Joomla template by a4joomla

We use cookies

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.
CookieHint and Consent by reDim GmbH (Opens in a new window)