A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
rusty jack tray
- meathumper
- New Member
-

Public
Less
More
- Thank you received: 0
02 Mar 2014 21:30 #106906
by meathumper
Replied by meathumper on topic rusty jack tray
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 976
- Thank you received: 77
02 Mar 2014 22:28 #106930
by robs5230
standard jimny - for now
Replied by robs5230 on topic rusty jack tray
i can see why you dropped the tank, that's not just a jack well repairmeathumper wrote: I did quite alot of the boot, and I took the tank out 1 its not good practice to weld that close to a tank for obvious reasons, 2 better access for treating after.
standard jimny - for now
Please Log in or Create an account to join the conversation.
- meathumper
- New Member
-

Public
Less
More
- Thank you received: 0
02 Mar 2014 23:15 #106937
by meathumper
Replied by meathumper on topic rusty jack tray
Please Log in or Create an account to join the conversation.
Time to create page: 0.081 seconds
