A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Another stupid caster correction thread
- Jimny_Aus
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
12 years 8 months ago #105240
by Jimny_Aus
Another stupid caster correction thread was created by Jimny_Aus
i was just wondering if any one has had plates made and welded to the front axle to correct castor, as an alternative to buying arms?? they arent the cheapest part for jims.....
just an idea ive been thinking about, im a broke ass draftsman with a wild mind :side: :silly: :blink:
just an idea ive been thinking about, im a broke ass draftsman with a wild mind :side: :silly: :blink:
Please Log in or Create an account to join the conversation.
- Dave cc
- New Member
-
Less
More
- Thank you received: 0
12 years 8 months ago - 12 years 8 months ago #105245
by Dave cc
Replied by Dave cc on topic Another stupid caster correction thread
If you look up gustavo on here he has just moved the holes on the front of his arms took a load of flack on here for doing it but from what I have read has worked fine only thing personally I would have done would have been to weld a reinforcing plate over the top
his username is gus2000
his username is gus2000
Last edit: 12 years 8 months ago by Dave cc.
Please Log in or Create an account to join the conversation.
- idiotmobil
- New Member
-
Less
More
- Thank you received: 0
12 years 8 months ago #105254
by idiotmobil
Replied by idiotmobil on topic Another stupid caster correction thread
Its a good idea and if you could move tge holes on chassis mount to gice a little more lenth im sure it would be even better I mite look in to this my self for the rear
Please Log in or Create an account to join the conversation.
- Jimny_Aus
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
12 years 8 months ago #105384
by Jimny_Aus
Replied by Jimny_Aus on topic Another stupid caster correction thread
yea i know jim bits sell plates for the rear, was thinking get plates made up for the front, unbolt axel, weld the new plates 5-10mm and bob's your uncle.
might have to have a look at it on the weekend, but my coils are evidently nit sitting right....
might have to have a look at it on the weekend, but my coils are evidently nit sitting right....
Please Log in or Create an account to join the conversation.
Time to create page: 0.073 seconds
