A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Clutch changing how to?
- craigy123
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
12 years 9 months ago #103992
by craigy123
Clutch changing how to? was created by craigy123
Is there one on here? I'm going to have to tackle it this week.
Please Log in or Create an account to join the conversation.
- Tadpole
- New Member
-
Less
More
- Thank you received: 0
12 years 9 months ago #103994
by Tadpole
Check out 'Guardian Angel's' thread done his by himself quite recently ..............
Replied by Tadpole on topic Clutch changing how to?
craigy123 wrote: Is there one on here? I'm going to have to tackle it this week.
Check out 'Guardian Angel's' thread done his by himself quite recently ..............
Please Log in or Create an account to join the conversation.
- craigy123
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
12 years 9 months ago #103995
by craigy123
Replied by craigy123 on topic Clutch changing how to?
www.eurocarparts.com/clutch-kit?gclid=CO...m9v7wCFafnwgodVRAAYw
15% off at euro car parts. So the exedy one will come in around £96. That seem a good deal? Anyone have that clutch?
15% off at euro car parts. So the exedy one will come in around £96. That seem a good deal? Anyone have that clutch?
Please Log in or Create an account to join the conversation.
12 years 9 months ago #103996
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Clutch changing how to?
Not a bad deal I guess....but this one is probably a better deal?
www.bigjimny.com/store/index.php?_a=product&product_id=201
www.bigjimny.com/store/index.php?_a=product&product_id=201
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- minitehnicus
- New Member
-
Less
More
- Thank you received: 0
12 years 9 months ago #103998
by minitehnicus
I have Exedy cluch kit in my jimnys and sammys.
Before Exedy i used Valeo and Sachs, wich was by far weak.
For jimny, i payed 102 euro for the hole kit:
Exedy SZD039 - the disk
Exedy SZC512 - the plate
SKF VKC 3684 - the bearing
For sammy is 110 euro.
Bassicaly is the same as the jimny one, only the bearing is different.
Replied by minitehnicus on topic Clutch changing how to?
craigy123 wrote: So the exedy one will come in around £96. That seem a good deal? Anyone have that clutch?
I have Exedy cluch kit in my jimnys and sammys.
Before Exedy i used Valeo and Sachs, wich was by far weak.
For jimny, i payed 102 euro for the hole kit:
Exedy SZD039 - the disk
Exedy SZC512 - the plate
SKF VKC 3684 - the bearing
For sammy is 110 euro.
Bassicaly is the same as the jimny one, only the bearing is different.
Please Log in or Create an account to join the conversation.
- craigy123
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
12 years 9 months ago #104004
by craigy123
Replied by craigy123 on topic Clutch changing how to?
Thanks for that Martin, should really of had a look there first! If I order tomorrow when will it be delivered?
Cheers Craig
Cheers Craig
Please Log in or Create an account to join the conversation.
Time to create page: 0.096 seconds
