A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Underbody armour
- Stu stu
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
12 years 10 months ago #99685
by Stu stu
Underbody armour was created by Stu stu
Gona go to my mates Saturday to make up some guards,, any photos dimensions fixing points would be great fully appreciated
Please Log in or Create an account to join the conversation.
- Tadpole
- New Member
-
Less
More
- Thank you received: 0
12 years 10 months ago #99698
by Tadpole
Replied by Tadpole on topic Underbody armour
No eBay APP ID and/or Cert ID defined in Kunena configurationJimmy bits are very good I also found this on the bay hth ................... 
Please Log in or Create an account to join the conversation.
- markyp2000
- New Member
-
Less
More
- Thank you received: 0
12 years 10 months ago #99706
by markyp2000
Replied by markyp2000 on topic Underbody armour
Lots on ebay look at this number then his other items 161178741312
Please Log in or Create an account to join the conversation.
- Venter
- New Member
-
Less
More
- Thank you received: 0
12 years 10 months ago - 12 years 10 months ago #99716
by Venter
Replied by Venter on topic Underbody armour
You guys think the 6mm aluminium on the above ebay stuff will hold up well?
Last edit: 12 years 10 months ago by Venter.
Please Log in or Create an account to join the conversation.
- markyp2000
- New Member
-
Less
More
- Thank you received: 0
12 years 10 months ago #99723
by markyp2000
what do you think thay use on rally cars for under side protection
also that link was just cos he asked for pic and dimensions fixing points
Replied by markyp2000 on topic Underbody armour
Venter wrote: You guys think the 6mm aluminium on the above ebay stuff will hold up well?
what do you think thay use on rally cars for under side protection
also that link was just cos he asked for pic and dimensions fixing points
Please Log in or Create an account to join the conversation.
Time to create page: 0.086 seconds
