A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Brake pad srping clips

  • 2013gary
  • Topic Author
  • New Member
  • New Member
    Public
More
31 Dec 2013 12:55 #98449 by 2013gary
Brake pad srping clips was created by 2013gary
I am in the middle of changing brake pads and discs and I noticed that on one side I am missing both of the spring clips that keep the pads in the carrier. I phoned Suzuki to see if they have any but they only supply them with the brake pads, which I have already bought from somewhere else.

Does anyone know where I can get some, or have any spare? Ideally I'd like 4 as the ones on the other side have seen better days as well. I have highlighted the part that I mean in the picture

Please Log in or Create an account to join the conversation.

  • Stu stu
  • New Member
  • New Member
    Public
More
31 Dec 2013 13:04 #98450 by Stu stu
Replied by Stu stu on topic Brake pad srping clips
Found you some but there in Australia, looks like they should come with the pads to be honest.

Please Log in or Create an account to join the conversation.

More
31 Dec 2013 13:47 #98461 by mlines
Replied by mlines on topic Brake pad srping clips
You need parts

55234-60B00
55235-60B00

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
31 Dec 2013 14:17 #98466 by j999pre
Replied by j999pre on topic Brake pad srping clips
I sent you a link to eBay ones

Gold Jimny the best colour (sold) :(

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

Time to create page: 0.156 seconds
Joomla template by a4joomla