A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Broken bolts
- professor
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
09 Dec 2013 19:09 #95183
by professor
Broken bolts was created by professor
what tensile of rod are you using?
Please Log in or Create an account to join the conversation.
- Poyner111
- New Member
-

Public
Less
More
- Thank you received: 0
09 Dec 2013 20:00 #95191
by Poyner111
Replied by Poyner111 on topic Broken bolts
Bits for vits, sent me one just I case my internal threat was nackered
Please Log in or Create an account to join the conversation.
- professor
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
09 Dec 2013 21:31 #95209
by professor
Replied by professor on topic Broken bolts
Please Log in or Create an account to join the conversation.
- mudman
- New Member
-

Public
Less
More
- Thank you received: 0
09 Dec 2013 22:29 #95221
by mudman
Replied by mudman on topic Broken bolts
Get then from bits for vits drill the old Ones with a 12mm drill bit job done that's what had to do
Please Log in or Create an account to join the conversation.
- Dunnin21
- New Member
-

Public
Less
More
- Thank you received: 0
11 Dec 2013 17:03 #95452
by Dunnin21
Replied by Dunnin21 on topic Broken bolts
I used 160mm bolts being fine had them on forca few month done p&p and a few lanes
Please Log in or Create an account to join the conversation.
Time to create page: 0.166 seconds
