A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

help with water leek

  • idiotmobil
  • Topic Author
  • New Member
  • New Member
More
13 years 2 months ago #82144 by idiotmobil
help with water leek was created by idiotmobil
ive been losing water been trying to find the leak today it seems to only do it wile driving cant get it to leak wile sat still driving it back and forward in the workshop works and it starts leaking drips are coming from back of engine area and dripping down and off gearbox the waters clean any common place I should look can see any hoses leeking and no signs of it being head gasket

Please Log in or Create an account to join the conversation.

  • Tadpole
  • New Member
  • New Member
More
13 years 2 months ago #82145 by Tadpole
Replied by Tadpole on topic help with water leek
Screen washer pipework/jet ................. :whistle:

Please Log in or Create an account to join the conversation.

  • idiotmobil
  • Topic Author
  • New Member
  • New Member
More
13 years 2 months ago #82150 by idiotmobil
Replied by idiotmobil on topic help with water leek
its coming out warm so my guess its not from the washer system unless im wrong isn't the washer water going to be cold

Please Log in or Create an account to join the conversation.

  • idiotmobil
  • Topic Author
  • New Member
  • New Member
More
13 years 2 months ago #82152 by idiotmobil
Replied by idiotmobil on topic help with water leek
just thought its got to be the cooling system not washes as I have to top up radiator

Please Log in or Create an account to join the conversation.

More
13 years 2 months ago #82162 by j999pre
Replied by j999pre on topic help with water leek
Heater pipe through the bullhead?

Gold Jimny the best colour (sold) :(

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

  • markyp2000
  • New Member
  • New Member
More
13 years 2 months ago #82168 by markyp2000
Replied by markyp2000 on topic help with water leek
There is a plate on the rear of the engine if its a single cam held on with to 10mm bolts i think it has a rubber O ring on it also itmay only be leaking when cold

Please Log in or Create an account to join the conversation.

Time to create page: 0.093 seconds
Joomla template by a4joomla

We use cookies

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.
CookieHint and Consent by reDim GmbH (Opens in a new window)