A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Cam Belt Tools
- Coog
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
05 Aug 2013 21:12 #79142
by Coog
Cam Belt Tools was created by Coog
Hi all,
Picked up a yr 2000 Jimny with a G13BB engine a few days ago. There's no record of the belt having been done so I'll probably change it to be on the safe side. I just wanted to check that there were no special locking tools required for this job?
I've done a couple of belts before but never on a Jimny
Thanks
Picked up a yr 2000 Jimny with a G13BB engine a few days ago. There's no record of the belt having been done so I'll probably change it to be on the safe side. I just wanted to check that there were no special locking tools required for this job?
I've done a couple of belts before but never on a Jimny
Thanks
Please Log in or Create an account to join the conversation.
- Dave cc
- New Member
-

Public
Less
More
- Thank you received: 0
05 Aug 2013 21:16 #79144
by Dave cc
Replied by Dave cc on topic Cam Belt Tools
No mate nothing required about as easy as it gets to do the belt on a Jimny
Please Log in or Create an account to join the conversation.
- Coog
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
11 Aug 2013 19:21 - 11 Aug 2013 19:23 #79608
by Coog
Replied by Coog on topic Cam Belt Tools
Got it done this morning. Took me a couple of hours but I wanted to take my time. Typically - the belt looked fresh on it so must've been done recently but I stuck the new one anyway. Thanks for the help
Last edit: 11 Aug 2013 19:23 by Coog.
Please Log in or Create an account to join the conversation.
Time to create page: 0.072 seconds
