A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

SJ transfer box props

RichiesJimny
Topic Author
New Member
Public

01 Jun 2013 11:09 #72363 by RichiesJimny

SJ transfer box props was created by RichiesJimny

I'm fitting a 410 transfer box and need to know what prop goes on the rear, I'm not worried what size the flange is I just need to know the approximate length or which prop you've used.

I know this has been covered before but there's lots of different answers so just let me know what you've used on the rear. Cheers guys

Please Log in or Create an account to join the conversation.

j999pre
Offline
Platinum Member
Registered

01 Jun 2013 13:03 #72374 by j999pre

Replied by j999pre on topic SJ transfer box props

I've got an sj front on the rear.

Gold Jimny the best colour (sold)

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

darthloachie
New Member
Public

01 Jun 2013 13:08 #72379 by darthloachie

Replied by darthloachie on topic SJ transfer box props

yep......sj front

Please Log in or Create an account to join the conversation.

kirkynut
Offline
Moderator
Registered

01 Jun 2013 18:45 #72402 by kirkynut

Replied by kirkynut on topic SJ transfer box props

^^^^^ What they said! ^^^^^

I know you said you ain't bothered about flanges but Off Road Armoury sell the right flange to put on the back of your transfer box to fit the SJ front prop on the rear. They are like hens teeth second hand.

Kirkynut

The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Please Log in or Create an account to join the conversation.

Dave n lincs
New Member
Public

02 Jun 2013 06:45 #72431 by Dave n lincs

Replied by Dave n lincs on topic SJ transfer box props

Iv got a sj front prop on my rear. So rear diff flange needed drilling but easy job to do.

Please Log in or Create an account to join the conversation.

RichiesJimny
Topic Author
New Member
Public

02 Jun 2013 09:40 #72444 by RichiesJimny

Replied by RichiesJimny on topic SJ transfer box props

Cheers guys I'll get an sj front prop sorted out then, I've got various props that were given to me when I bought the box so I'm going to just swap the yokes round to suit my diffs and drive flanges.
Still makes me smile when I type in flange

Please Log in or Create an account to join the conversation.

Time to create page: 0.221 seconds

SJ transfer box props

Events Menu

We use cookies