A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
cv joint clicking
- darthloachie
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
13 years 5 months ago #71299
by darthloachie
cv joint clicking was created by darthloachie
went offroading on Sunday and the jimny has developed a clicking on lock which I assume is a cv joint
Is there away to work out which one without stripping both sides down?
Is there away to work out which one without stripping both sides down?
Please Log in or Create an account to join the conversation.
- markyp2000
- New Member
-
Less
More
- Thank you received: 0
13 years 5 months ago #71312
by markyp2000
Replied by markyp2000 on topic cv joint clicking
Only if yu put it in 4wd and find ou what lock it does it on
Please Log in or Create an account to join the conversation.
13 years 5 months ago #71361
by kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Replied by kirkynut on topic cv joint clicking
If one's clicking, the other will likely be in a similar set of circumstances - the CV's on my old SJ clicked a bit once, so I re-packed them with new grease after a clean and they never did again.
Maybe worth a strip down and re-grease of both.
Kirkynut
Maybe worth a strip down and re-grease of both.
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
- darthloachie
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
13 years 5 months ago #71409
by darthloachie
Replied by darthloachie on topic cv joint clicking
thanks guys
seems to do it on both locks
seems to do it on both locks
Please Log in or Create an account to join the conversation.
Time to create page: 0.075 seconds
