A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Gearbox Overhaul
- Smoggy
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
13 years 6 months ago #70469
by Smoggy
Gearbox Overhaul was created by Smoggy
After speaking with my local gearbox shop I must admit to not being overwhelmed with confidence even though the same guy did a good job rebuilding my front diff. He quoted me approximately £200 to fully overhaul my 110K M13 gearbox but because of his couldn't care less attitude I feel less than confident that he will do a thorough job.
In fact I am not even sure what to realistically expect in terms of replacement parts for that sum of money.
If I sourced replacement bearings, bushes etc. would a gearbox rebuild be beyond my capabilities bearing in mind I am no mechanic but do have a reasonable toolkit.
Cheers.
In fact I am not even sure what to realistically expect in terms of replacement parts for that sum of money.
If I sourced replacement bearings, bushes etc. would a gearbox rebuild be beyond my capabilities bearing in mind I am no mechanic but do have a reasonable toolkit.
Cheers.
Please Log in or Create an account to join the conversation.
- gilburton
- New Member
-
Less
More
- Thank you received: 0
13 years 6 months ago - 13 years 6 months ago #70474
by gilburton
Replied by gilburton on topic Gearbox Overhaul
Well a recon gearbox would probably set you back around £800 exchange.
A genuine Suzuki recon box will probably cost £1500+
A lower mileage box off Ebay around £150/£200
the choice is yours but £200 sounds a bit cheap to me so is he fully rebuilding it or just replacing bearings/seals??
Don't forget his profit/labour costs??
A genuine Suzuki recon box will probably cost £1500+
A lower mileage box off Ebay around £150/£200
the choice is yours but £200 sounds a bit cheap to me so is he fully rebuilding it or just replacing bearings/seals??
Don't forget his profit/labour costs??
Last edit: 13 years 6 months ago by gilburton.
Please Log in or Create an account to join the conversation.
13 years 6 months ago #70556
by kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Replied by kirkynut on topic Gearbox Overhaul
I'd just go for a second hand box perhaps from CamSuzuki to know you are getting the right one.
Kirkynut
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
13 years 6 months ago #70561
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Gearbox Overhaul
We have a local gearbox expert who produces some beautiful work re-building gearboxes and producing competition gearboxes, mainly for Fords.
I asked him about Jimny gearboxes and he said he wouldn't touch them as it would work out too expensive.
I asked him about Jimny gearboxes and he said he wouldn't touch them as it would work out too expensive.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Time to create page: 0.076 seconds
