A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
window washers not working
- Skinhead
- Topic Author
- Visitor
-
Public
25 Feb 2013 18:20 #63936
by Skinhead
I better keep it topped up then
Replied by Skinhead on topic window washers not working
facade wrote: If you are using the rear pump, it will stop working with a fair bit of water left in the tank. The rear pump should be higher up than the front.
I better keep it topped up then
Please Log in or Create an account to join the conversation.
25 Feb 2013 23:23 #63984
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic window washers not working
The idea is the rear runs out first, so you know that it is nearly empty, or you can't empty the tank with over use of the rear washer, so it leaves a few squirts for the front.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.114 seconds