A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Diff ratio/Speedo drive

vitara_mad
Visitor
Public

12 Feb 2013 17:16 #62257 by vitara_mad

Replied by vitara_mad on topic Diff ratio/Speedo drive

if you fit the speedo pickup on the front output of the transfer box it will only work when in 4wd

Please Log in or Create an account to join the conversation.

Dave cc
Topic Author
Visitor
Public

12 Feb 2013 18:03 #62266 by Dave cc

Replied by Dave cc on topic Diff ratio/Speedo drive

Na G wagon axles dont have free wheeling hubs as they are permenent 4 WD so front prop will allways be turning

Please Log in or Create an account to join the conversation.

panosd
Visitor
Public

12 Feb 2013 18:38 #62270 by panosd

Replied by panosd on topic Diff ratio/Speedo drive

Jimny axles have 11/43 until 2005, pre vvt. and 10/43 in vvt models. Thats 3.9 and 4.3 ratios.

Dave with 3.9 diff ratio and 410 t-case i had +10km from the speed shown on dash.

Friend of mine with g axles in GV 1600cc has 4000rpm with 120km/h with 413 t-case and 235/85/16 tires.

The 11/45 are form the japan spec jimny.

Please Log in or Create an account to join the conversation.

Rockwatt
Visitor
Public

14 Feb 2013 23:05 #62633 by Rockwatt

Replied by Rockwatt on topic Diff ratio/Speedo drive

Dave cc wrote: 33 s with a 4.99:1 diff ratio ???

Umm you need 29.7 teeth !! pmsl I'd go for 29 ! Better to be reading slightly over, and most 33's are only usually 32.

Please Log in or Create an account to join the conversation.

Time to create page: 0.179 seconds

Diff ratio/Speedo drive

Events Menu