A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
front and rear diff question
06 Jan 2013 16:03 #57269
by MigCooper
_________________________________________
Snorkel and plenty of rust to be treated
_________________________________________
front and rear diff question was created by MigCooper
Hey Guys
Anyone know what the differences are between the front and rear diff in the jimny? will the rear lock-right fit the front diff?
Cheers
Anyone know what the differences are between the front and rear diff in the jimny? will the rear lock-right fit the front diff?
Cheers
_________________________________________
Snorkel and plenty of rust to be treated
_________________________________________
Please Log in or Create an account to join the conversation.
06 Jan 2013 16:27 #57270
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic front and rear diff question
Rear diff is a 4 pin type front is 2 pin.
The pinion is central on the rear diff, and low down at the front.
I don't know if the lock-right (I suspect it is actually a loc-rite ) will fit I'm afraid. The differential gears might be the same fromt & back I don't know. 
The pinion is central on the rear diff, and low down at the front.
I don't know if the lock-right (I suspect it is actually a loc-rite
) will fit I'm afraid. The differential gears might be the same fromt & back I don't know. If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
06 Jan 2013 16:30 #57271
by MigCooper
_________________________________________
Snorkel and plenty of rust to be treated
_________________________________________
Replied by MigCooper on topic front and rear diff question
loc-rite is right 
Yes, that's what i thought, as well I think the spline count is different but no harm in asking anyway ...
Yes, that's what i thought, as well I think the spline count is different but no harm in asking anyway ...
_________________________________________
Snorkel and plenty of rust to be treated
_________________________________________
Please Log in or Create an account to join the conversation.
- adamjimny
- Visitor
-
Public
06 Jan 2013 17:57 #57284
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic front and rear diff question
Its LockRight -
www.bigjimny.com/store/index.php/off-roa...ff-locker/p_133.html
I have researched into the front ones with the guys in the states and there is not a solution at present apart from an expensive ARB (or a chinese or german copy).
Martin
-
www.bigjimny.com/store/index.php/off-roa...ff-locker/p_133.html
I have researched into the front ones with the guys in the states and there is not a solution at present apart from an expensive ARB (or a chinese or german copy).
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Dutchjimny
- Visitor
-
Public
Time to create page: 0.199 seconds