BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Ready, steady, SLOW

  • Dutchjimny
  • Visitor
  • Visitor
    Public
04 Jan 2013 16:36 #57158 by Dutchjimny
Replied by Dutchjimny on topic Ready, steady, SLOW
www.ih8mud.com/tech/soa/5.html . Read this forget my pictures :laugh:

Please Log in or Create an account to join the conversation.

  • Smoggy
  • Visitor
  • Visitor
    Public
05 Jan 2013 01:36 #57189 by Smoggy
Replied by Smoggy on topic Ready, steady, SLOW

darthloachie wrote: 1.6 vitara engine will do the trick ;)


Yeah Darth thats what my son suggested too. Might actually get more than 20mpg from it then too :laugh:

Please Log in or Create an account to join the conversation.

  • Hastiekid
  • Visitor
  • Visitor
    Public
05 Jan 2013 10:42 #57194 by Hastiekid
Replied by Hastiekid on topic Ready, steady, SLOW

Dutchjimny wrote: Dont forget it are AT's and a lobsterbox 4.16 ratio, when the car was raised with the full ora 3"liftkit the arms did not correct the castor enough to align the kingpin's back in the "top-bottom" position so we cut the welds on the axle each side to rotate the complete axle another 3degree and weld it back on i hope you understand what i mean? Will shoot some pictures tomorrow if any is intrested?

Regards, stefan


Thanks for the explanation I totally understand. A very interesting solution to this problem, I had never come across it before.

Ian

Please Log in or Create an account to join the conversation.

Time to create page: 0.114 seconds
Joomla template by a4joomla