help front drives coil hits chassis

You got normal bushes in them now then? As above are you sure they are rear arms? And as above again with CC mine werent even close to that bend and are perfectly straight with CC arms.....id check every inch of the new bits thats been put on ie springs panards CC arms etc and make sure its all on correctly etc

Are the CC arms on the right way up etc. Failing that take lots of pics and post on here and we will see if we can spot anything wrong etc

sent from my Samsung Galaxy S2 using tapatalk

Ok thanks Will do that yer arms are front ones of rus and ploybushes in them new Packard arm bushes and new coils on but can not work out why there is that much bow in them doing my head in fair play lol

Just been look at your photos, is your jimny on a level surfaces as the bush in the photo look twisted, you might have damaged the driver's side arm.

no it on about full flex in pic mate that when it hits it will get pic of it on the flat for you in morning

Had the Jimny in my mates garage to day we put a tracker 400 on to see if it was tracked up ok and it was spot on so i am still stuck here

hi rus can you help me as your the man the lift kit and front arms are of its is bugging me lol lol hope you can help bro as you have been brill in the past thanks fella