A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Hi all i just bought, taxed, mot'd and insured my jimny and the speedo have stopped working. The rev needle is still working and everything else, i have checked the rev sensor connections, all the fuses i could find, checked all the wiring behind the clocks and changed the clocks and still not working. I also disconnected the batter for a few minutes and a couple of hours.
the rev counter would still work if the speedo isnt its to different systems i think the speedo pick up is the bottom plug on the transfer box and there is no need to remove the box to change it also what year and engine do you have
Hi Mark thank you for the info. I have an x reg 2000 jimny. Thats the plug and wires i checked which seem to be sitting in and the wires seem ok. Do it just pull out or will i need tools? How do i check to see if its working?
