A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Diff breathers

DVs-Jimny
Topic Author
New Member
Public

18 Oct 2012 21:39 #50756 by DVs-Jimny

Diff breathers was created by DVs-Jimny

Maybe a silly question but how much slack should there be when fitting diff breathers. I assume that if you tie them to the chassis then the axles will move and could potentially pull them off, defeating the object.

Or am I being a plonker?

Thanks

Please Log in or Create an account to join the conversation.

markyp2000
New Member
Public

18 Oct 2012 22:09 #50760 by markyp2000

Replied by markyp2000 on topic Diff breathers

run it down one of the trailing arms to the chassis mount and you wont need any slack

Please Log in or Create an account to join the conversation.

DVs-Jimny
Topic Author
New Member
Public

18 Oct 2012 22:14 #50761 by DVs-Jimny

Replied by DVs-Jimny on topic Diff breathers

Much obliged

Please Log in or Create an account to join the conversation.

jonesyba420
New Member
Public

26 May 2013 12:07 #71769 by jonesyba420

Replied by jonesyba420 on topic Diff breathers

check out my thread i did this recently: www.bigjimny.com/index.php/forum/6-jimny...t/49497-transfer-box

Please Log in or Create an account to join the conversation.

Time to create page: 0.148 seconds

Diff breathers

Events Menu

We use cookies