BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Pics of installed ORA skid plate?

  • Paul4x4
  • Topic Author
  • Visitor
  • Visitor
    Public
06 Oct 2012 10:40 #49607 by Paul4x4
Pics of installed ORA skid plate? was created by Paul4x4
I've been searching for some pics of installed ORA t-box skids, because I'd like to see how it bolts on under there, and how much it will affect the ground clearance, but I just can't find any! :blink: It's no problem for me to make one myself, but if I the ORA one suits my needs that would help my lazy a$$ a lot! :laugh:

Please Log in or Create an account to join the conversation.

  • supergaz
  • Visitor
  • Visitor
    Public
06 Oct 2012 11:48 #49610 by supergaz
Replied by supergaz on topic Pics of installed ORA skid plate?
It bolts to the same points as the transfer box mounts. Also check out the jimnybits transferbox guard, takes just minutes to fit.

Please Log in or Create an account to join the conversation.

  • Paul4x4
  • Topic Author
  • Visitor
  • Visitor
    Public
06 Oct 2012 12:01 #49611 by Paul4x4
Replied by Paul4x4 on topic Pics of installed ORA skid plate?
The reason I'm thinking about getting the ORA one is because they offer a combo deal of t-box fitting kit + skid plate, and if I get the fitting kit I could crab a skid plate on the same order if it's good. Otherwise I'm gonna fab my own skid(if I could raise the t-box some, I think I could make it out of almost flat plate so it wouldn't affect the ground clearance much...).

Please Log in or Create an account to join the conversation.

  • TomDK
  • Visitor
  • Visitor
    Public
06 Oct 2012 17:36 #49618 by TomDK
Replied by TomDK on topic Pics of installed ORA skid plate?
Have a look at ORA's facebook account. There you'll find pics :-)

Please Log in or Create an account to join the conversation.

  • Paul4x4
  • Topic Author
  • Visitor
  • Visitor
    Public
06 Oct 2012 19:25 #49623 by Paul4x4
Replied by Paul4x4 on topic Pics of installed ORA skid plate?

TomDK wrote: Have a look at ORA's facebook account. There you'll find pics :-)

Of course... I should have known that! Everything is on facebook these days but me, and I'm gonna keep it this way! :laugh:

Please Log in or Create an account to join the conversation.

  • Smoggy
  • Visitor
  • Visitor
    Public
06 Oct 2012 20:18 #49633 by Smoggy
Replied by Smoggy on topic Pics of installed ORA skid plate?
I got an ORA one Paul. It's very good and my only criticism is that it's dished and would hold an inch of water when you jetwashed it after a days off roading. I drilled half a dozen 10mm holes in mine and liberally undersealed the top prior to fitting it.

Please Log in or Create an account to join the conversation.

Time to create page: 0.352 seconds
Joomla template by a4joomla