BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Rear half shaft extraction

  • Goat
  • Topic Author
  • Visitor
  • Visitor
    Public
14 Jul 2012 18:20 #44157 by Goat
Replied by Goat on topic Re: Rear half shaft extraction
Thanks for the replys everyone . Yeah I undid the 4 bolts and tried putting the wheel back on but it wouldn't budge.

Please Log in or Create an account to join the conversation.

  • markyp2000
  • Visitor
  • Visitor
    Public
14 Jul 2012 18:46 #44158 by markyp2000
Replied by markyp2000 on topic Re: Rear half shaft extraction
is the back plate free its not stuck on with silicone or any other sealent if its not just tap it free with some wood and a hammer then put the wheel on and with out the drum and try spining it and hitting it with a rubber mallet or use the wheel as described as above

Please Log in or Create an account to join the conversation.

  • Goat
  • Topic Author
  • Visitor
  • Visitor
    Public
14 Jul 2012 20:57 #44163 by Goat
Replied by Goat on topic Re: Rear half shaft extraction
Yes it was hanging free. I was hitting the wheel with a lump hammer as hard as I could and nothing was moving. Even put the hub on the wrong way round and belted that with a lump hammer.

Please Log in or Create an account to join the conversation.

  • markyp2000
  • Visitor
  • Visitor
    Public
14 Jul 2012 21:14 - 14 Jul 2012 21:22 #44165 by markyp2000
Replied by markyp2000 on topic Re: Rear half shaft extraction
does it have abs dont no if it makes a differece if the sensor is in or out take a look at renard38 jimny page 17 near the bottom has pics and videos
Last edit: 14 Jul 2012 21:22 by markyp2000.

Please Log in or Create an account to join the conversation.

More
14 Jul 2012 21:36 #44166 by mcjimny
Replied by mcjimny on topic Re: Rear half shaft extraction
If its never been off it will take a bit of work! Spray some wd40 around the end of the axle tube where the bearing sits, mine had corroded so much it was stuck the first time but i used the hitting the wheel with a hammer routine. I work my way round all the accessible parts of the wheel and it soon starts to move free. A deadblow hammer works well.
Black Jimny's don't get stuck!

Please Log in or Create an account to join the conversation.

More
15 Jul 2012 12:09 - 15 Jul 2012 16:55 #44185 by dirtydogz
Replied by dirtydogz on topic Re: Rear half shaft extraction
Nick take a look at this video + photos from Renard38
www.bigjimny.com/index.php/forum/20-fran...ents-de-roue-arriere
You will need to use a translator if you don't speak French.
2002 JLX Soft Top B)
Jimnybits 2" lift +Pro Comp ES1000 shocks.:) Big Jimny rear shock mounts. Big Jimny adjustable panhard rods.
Big Jimny steering damper bracket. Disco Armstrong steering damper. 7X15 black modulars. 205/75/15 Maxxis 743 bravo m/t.Superpro camber correction bushes.Black A bar....
Last edit: 15 Jul 2012 16:55 by dirtydogz.

Please Log in or Create an account to join the conversation.

Time to create page: 0.139 seconds
Joomla template by a4joomla