A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
My New Front Recovery Set-up
- goatboy
- Topic Author
- Visitor
-
Public
- goatboy
- Topic Author
- Visitor
-
Public
07 Jun 2012 20:10 #41938
by goatboy
Replied by goatboy on topic Re: My New Front Recovery Set-up
Had crossed my mind about the crumple zone. I've welded beyond the cross member to try and avoid this but does the crumple zone go beyond there?
It's a black jimny anyway so should not really need recovery points...
It's a black jimny anyway so should not really need recovery points...
Please Log in or Create an account to join the conversation.
07 Jun 2012 21:26 #41947
by mcjimny
Naturally!
Not sure how far back the crumple zones go, i do know that it doesn't take much to deform any of that area! Disco 1 Jimny 0
If using a bridle just a piece of angle welded between the legs should be enough i would have thought. I need to find a solution for the front, something high and accessible like yours
Black Jimny's don't get stuck!
Replied by mcjimny on topic Re: My New Front Recovery Set-up
goatboy wrote: It's a black jimny anyway so should not really need recovery points...
Naturally!
Not sure how far back the crumple zones go, i do know that it doesn't take much to deform any of that area! Disco 1 Jimny 0
If using a bridle just a piece of angle welded between the legs should be enough i would have thought. I need to find a solution for the front, something high and accessible like yours Black Jimny's don't get stuck!
Please Log in or Create an account to join the conversation.
Time to create page: 0.222 seconds