A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

fitting a spring spacer to cure the jimny lean

Johnniehec
Offline
Platinum Member
Registered

15 May 2012 12:57 #40340 by Johnniehec

Replied by Johnniehec on topic Re: fitting a spring spacer to cure the jimny lean

Johnniehec wrote:
robs5230 wrote: hi i need to fit a spacer to cure the lean on the front drivers corner. what is the easiest way of doing this ?
is it jacking up the car and compressing the spring ?
cheers

Rob try it the other way round ie compress the spring then jack it up, you can bind the springs with two (on opposite sides) small ratchet straps then jack it up. Like this, obviously not a Jimny spring but you get the idea.

Cheers,
John.