A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
my jimny 1.3
- wanderinstar
- Visitor
-
Public
- Paul4x4
- Visitor
-
Public
24 Mar 2012 12:57 #36275
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Re: my jimny 1.3
There isnt an airflow sensor.
The jimny uses a MAP (manifold absolute pressure) sensor, throttle angle sensor and inlet air temperature sensor along with the lambda sensor to make up the fuelling.
The most likely explanations for reluctance to rev are:
Air cleaner blocked
exhaust blocked (catalyst usually, but you say there isn't one) have a look for a flattened pipe, or a clod of mud in the tail pipe.
throttle cable has stretched so much the throttle doesn't open.
The jimny uses a MAP (manifold absolute pressure) sensor, throttle angle sensor and inlet air temperature sensor along with the lambda sensor to make up the fuelling.
The most likely explanations for reluctance to rev are:
Air cleaner blocked
exhaust blocked (catalyst usually, but you say there isn't one) have a look for a flattened pipe, or a clod of mud in the tail pipe.
throttle cable has stretched so much the throttle doesn't open.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
- wanderinstar
- Visitor
-
Public
- Paul4x4
- Visitor
-
Public
- beeson
- Topic Author
- Visitor
-
Public
Time to create page: 0.275 seconds