A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

DIY Radius Arm Guards?

renard38
Visitor
Public

22 Dec 2011 19:04 #28963 by renard38

Replied by renard38 on topic Re: DIY Radius Arm Guards?

no..., it's too much work

:blush:

Please Log in or Create an account to join the conversation.

HiJim
Topic Author
Visitor
Public

23 Dec 2011 11:12 #29045 by HiJim

Replied by HiJim on topic Re: DIY Radius Arm Guards?

haha didnt think so, looks like it mate
might have to look into getting a welder and getting a mate to help me out hey!

Please Log in or Create an account to join the conversation.

Obarno
Offline
Platinum Member
Registered

23 Dec 2011 17:04 #29083 by Obarno

Replied by Obarno on topic Re: DIY Radius Arm Guards?

I've bought these which seem fine and much better than if I had made them myself!

www.jimnybits.co.uk/shop/jimny/jimny-rad...lete-set/prod_9.html

Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15

Please Log in or Create an account to join the conversation.

Time to create page: 0.153 seconds

DIY Radius Arm Guards?

Events Menu