A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
when i fitted mine i had to lenghten steering by 10mm and the bolts only just went on the flats on the splines, would have been better at 15mm. prop lenghts dont alter as transfer box is mounted to the chassis. also front bumper will need modifing, and i had to bend transfer box lever a little so it would go into 4low. and also theres a brake pipes union that fastens to the chassis near the engine that needs lifting.
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
