BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Chassis clearance

  • aniesigh
  • Topic Author
  • Visitor
  • Visitor
    Public
03 Nov 2011 20:34 #25113 by aniesigh
Chassis clearance was created by aniesigh
Hi all,
could someone with a standard (ish) height jimny let me know the clearance between the ground and the bottom of the chassis rails at the lowest point?
cheers :)

Adam

Please Log in or Create an account to join the conversation.

  • aniesigh
  • Topic Author
  • Visitor
  • Visitor
    Public
05 Nov 2011 20:05 #25213 by aniesigh
Replied by aniesigh on topic Re: Chassis clearance
anyone? pleassseeee :) doesnt matter if its not standard height just let me know roughly how much its been lifted

Please Log in or Create an account to join the conversation.

  • ZookFastback
  • Visitor
  • Visitor
    Public
06 Nov 2011 06:27 #25221 by ZookFastback
Replied by ZookFastback on topic Re: Chassis clearance
At a point midway between the rear of the front radius arm and the front of the rear radius arm, my chassis is 260mm of clearance. Its a Santana Suzi soft top.

Standard suspension components 11 years old.

Why? :silly:

Please Log in or Create an account to join the conversation.

  • aniesigh
  • Topic Author
  • Visitor
  • Visitor
    Public
06 Nov 2011 09:43 #25224 by aniesigh
Replied by aniesigh on topic Re: Chassis clearance
Brilliant thans B)

just trying to work out what height my truck will run, need to decide where to put axle link brackets.

thanks again

Please Log in or Create an account to join the conversation.

  • Blakey
  • Visitor
  • Visitor
    Public
06 Nov 2011 11:17 #25230 by Blakey
Replied by Blakey on topic Re: Chassis clearance
Mines running lj78 axles, 3" ORA lift kit and 37" Swampers and I have got about 20" but its not got any weight in it as yet so will probally loose 2" or more when its got all the bits in it. Hope this helps

Please Log in or Create an account to join the conversation.

  • X-Eng Simon
  • Visitor
  • Visitor
    Public
06 Nov 2011 11:37 #25232 by X-Eng Simon
Replied by X-Eng Simon on topic Re: Chassis clearance
Blakey - got any photos? It would be interesting to see how you have approached it? My swampers measure 36.5" and I've needed to move each axle 100mm further out. Clearance under the mid point of the chassis rails is 400mm without any gas in the Fox Air Shox - so I guess about 500 with.

Si

Please Log in or Create an account to join the conversation.

Time to create page: 0.142 seconds
Joomla template by a4joomla