A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
CV joint cost?
- Nobby22
- Topic Author
- Visitor
-
Public
17 Sep 2011 06:57 #22030
by Nobby22
CV joint cost? was created by Nobby22
Hi all
I've got the car booked in for monday to have the front off-side wheel checked. Its making a clicking sound when turning, mainly in reverse. I have checked for play in the kingpins and there is none. So iam thinking its probably the CV joint. Just wondered if anyone knows what they cost? I assume we a talking hundreds. .
Cheers
Nobby
I've got the car booked in for monday to have the front off-side wheel checked. Its making a clicking sound when turning, mainly in reverse. I have checked for play in the kingpins and there is none. So iam thinking its probably the CV joint. Just wondered if anyone knows what they cost? I assume we a talking hundreds. .
Cheers
Nobby
Please Log in or Create an account to join the conversation.
17 Sep 2011 07:18 #22032
by andyw
Replied by andyw on topic Re: CV joint cost?
Hi,
CV joint just around £54 ish, and follow Martins ( How to guide )............or hundreds like you say.
I'd take it slow and do it yourself, just a dirty job and put a sheet of something down on the floor to catch all the slime lol
Andy
CV joint just around £54 ish, and follow Martins ( How to guide )............or hundreds like you say.
I'd take it slow and do it yourself, just a dirty job and put a sheet of something down on the floor to catch all the slime lol
Andy
Please Log in or Create an account to join the conversation.
- doncarlyon
- Visitor
-
Public
17 Sep 2011 07:35 #22033
by doncarlyon
Replied by doncarlyon on topic Re: CV joint cost?
Mine has also started clicking when turning in 4wd... will get it looked at when it goes for MOT soon.
Please Log in or Create an account to join the conversation.
17 Sep 2011 08:05 #22034
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re: CV joint cost?
There are two types. One is around £50 or less from motor factors (including me). The other is Suzuki only and only comes with the entire shaft for ££££'s
Watch out for cheap ebAy ones, they are often completely wrong
Martin
Watch out for cheap ebAy ones, they are often completely wrong
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- doncarlyon
- Visitor
-
Public
17 Sep 2011 10:09 #22041
by doncarlyon
Replied by doncarlyon on topic Re: CV joint cost?
How do you know which it is?
Please Log in or Create an account to join the conversation.
- Nobby22
- Topic Author
- Visitor
-
Public
21 Sep 2011 16:38 #22281
by Nobby22
Replied by Nobby22 on topic Re: CV joint cost?
Hi all
Well in total it all cost £400. :ohmy: Oh well, there goes the winch! . I had to have BOTH of them replaced. At some point in the past the wrong type of grease had been used. He said the grease had dried out inside the housing. Lucky i had them checked. That could have been a disaster if they had failed off-road. :ohmy: Its now because of this i can no longer go to bigjimny. . I surpose £400 is nothing compared to if i had gon to Suzuki.
Nobby
Well in total it all cost £400. :ohmy: Oh well, there goes the winch! . I had to have BOTH of them replaced. At some point in the past the wrong type of grease had been used. He said the grease had dried out inside the housing. Lucky i had them checked. That could have been a disaster if they had failed off-road. :ohmy: Its now because of this i can no longer go to bigjimny. . I surpose £400 is nothing compared to if i had gon to Suzuki.
Nobby
Please Log in or Create an account to join the conversation.
- doncarlyon
- Visitor
-
Public
21 Sep 2011 16:51 #22284
by doncarlyon
Replied by doncarlyon on topic Re: CV joint cost?
£400... bloody hell... where did you get that done? Suzuki?
Please Log in or Create an account to join the conversation.
- Nobby22
- Topic Author
- Visitor
-
Public
21 Sep 2011 16:58 #22285
by Nobby22
Replied by Nobby22 on topic Re: CV joint cost?
No. :laugh: I used a local garage. Compared to what Suzuki would have charged me i think £400 wasnt to bad. :laugh:. I am just pissed off about the wrong grease being used. Thanks to someones complete bloody stupidness i've had to pay for something that should'nt have had to be done.
Nobby
Nobby
Please Log in or Create an account to join the conversation.
- doncarlyon
- Visitor
-
Public
21 Sep 2011 17:07 #22286
by doncarlyon
Replied by doncarlyon on topic Re: CV joint cost?
So what did they actually replace for the £400?
2 CV joints?
2 CV joints?
Please Log in or Create an account to join the conversation.
- unsure
- Visitor
-
Public
21 Sep 2011 17:50 #22290
by unsure
Replied by unsure on topic Re: CV joint cost?
sounds bloody expensive to me too....
I woul dhave just packed more good grease in, would of prob lasted a while yet....
I woul dhave just packed more good grease in, would of prob lasted a while yet....
Please Log in or Create an account to join the conversation.
- Nobby22
- Topic Author
- Visitor
-
Public
21 Sep 2011 17:54 #22292
by Nobby22
Replied by Nobby22 on topic Re: CV joint cost?
£150 for 3 hours labour
£208 for two c.v. joints. So thats £104 each. :dry:
£10 sundries
Total £441.60
£208 for two c.v. joints. So thats £104 each. :dry:
£10 sundries
Total £441.60
Please Log in or Create an account to join the conversation.
22 Sep 2011 17:15 #22354
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic CV joint cost?
Remember that Suzuki do not do separate CV's they replace the whole driveshaft which means it will always be expensive.
-- Sent from my HP TouchPad using Communities
-- Sent from my HP TouchPad using Communities
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Time to create page: 0.153 seconds