BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

i need help: front prop spacer, with 3" radius arm

  • renard38
  • Topic Author
  • Visitor
  • Visitor
    Public
21 Jul 2011 16:41 #19313 by renard38
i need help: front prop spacer, with 3" radius arm was created by renard38
hi,
i bought jimnybits "Suzuki Jimny 3" Castor Corrected Radius Arms" with A front prop spacer .

[img


Where i must put the front prop spacer: near the transfert box or at the front shaft axle????????

Thanks for reply ;)

Please Log in or Create an account to join the conversation.

  • supergaz
  • Visitor
  • Visitor
    Public
21 Jul 2011 17:35 #19319 by supergaz
Replied by supergaz on topic Re: i need help: front prop spacer, with 3" radius arm
Put it on the transfer box end. Look at the gap between the chassis rail and the prop, it gets close. :-)

Please Log in or Create an account to join the conversation.

  • renard38
  • Topic Author
  • Visitor
  • Visitor
    Public
22 Jul 2011 06:14 #19332 by renard38
Replied by renard38 on topic Re: i need help: front prop spacer, with 3" radius arm
thanks ;)

Please Log in or Create an account to join the conversation.

  • renard38
  • Topic Author
  • Visitor
  • Visitor
    Public
22 Jul 2011 15:35 #19351 by renard38
Replied by renard38 on topic Re: i need help: front prop spacer, with 3" radius arm
i have another problem: today i wanted to put on the shaft axle the 1" prop spacer. But there is not enough place. I think i need 0,5" prop spacer ( i have a transfert box 4.16 who come's from a samurai 413 )

have you got the same problem??????????

Please Log in or Create an account to join the conversation.

  • panosd
  • Visitor
  • Visitor
    Public
22 Jul 2011 16:23 - 22 Jul 2011 16:24 #19354 by panosd
Replied by panosd on topic Re: i need help: front prop spacer, with 3" radius arm
You need a 15mm prop spacer with the sami t-case.

BTW very nice looking arms. From quality?
Last edit: 22 Jul 2011 16:24 by panosd.

Please Log in or Create an account to join the conversation.

  • renard38
  • Topic Author
  • Visitor
  • Visitor
    Public
22 Jul 2011 17:11 #19358 by renard38
Replied by renard38 on topic Re: i need help: front prop spacer, with 3" radius arm
thanks for reply. I'll send a mail at jimnybits :S

pictures:

[IMG


[IMG


seems solid

[IMG


i paint them in red

[IMG

Please Log in or Create an account to join the conversation.

Time to create page: 0.120 seconds
Joomla template by a4joomla