BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

i need help: what is this noise ( from a pulley )

  • renard38
  • Topic Author
  • Visitor
  • Visitor
    Public
26 Jun 2011 17:36 #18290 by renard38
i need help: what is this noise ( from a pulley ) was created by renard38
hi
i have changed the viscous coupling, but noise again :sick: Have you got ever the same?? Where it's comes from???




A+

Please Log in or Create an account to join the conversation.

More
26 Jun 2011 19:53 #18300 by facade
Replied by facade on topic Re: i need help: what is this noise ( from a pulley )
Take off the belt for the power steering, by slackening the bolts through the adjuster and see if it is still noisy.

If it is, it may be the alternator bearings, water pump, or even just a worn out fanbelt, or one that needs retensioning.

If it isn't, it may be the tensioner pulley, steering pump or again a worn out drive belt.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there :)

Please Log in or Create an account to join the conversation.

  • renard38
  • Topic Author
  • Visitor
  • Visitor
    Public
27 Jun 2011 09:21 #18311 by renard38
Replied by renard38 on topic Re: i need help: what is this noise ( from a pulley )
yes, i would do this yesterday in the woods, but i haven't enough tools with me :blush:

this afternoon i go at suzuki dealer in order to see if i can drive with this noise during my holliday ( 2 weeks ) and i'll repair after.

Please Log in or Create an account to join the conversation.

  • panosd
  • Visitor
  • Visitor
    Public
27 Jun 2011 11:21 #18315 by panosd
Replied by panosd on topic Re: i need help: what is this noise ( from a pulley )
It's not a big deal. Just go to a suzuki service and ask them to tight up your 2 belts between the fan and the

engine. It takes about 5 minutes to do both.

Its easy for them to do that because of a special tool that they have for this job.

Please Log in or Create an account to join the conversation.

  • renard38
  • Topic Author
  • Visitor
  • Visitor
    Public
27 Jun 2011 16:07 #18322 by renard38
Replied by renard38 on topic Re: i need help: what is this noise ( from a pulley )
the belts don't slide on the pulley.

I have see suzuki dealer and they told me the only methode is to put a belt after another. That of the alternator and then the power steering .

Please Log in or Create an account to join the conversation.

  • panosd
  • Visitor
  • Visitor
    Public
27 Jun 2011 16:48 #18323 by panosd
Replied by panosd on topic Re: i need help: what is this noise ( from a pulley )
I had the same problem in the past and that was the solution. I ask me friend at local suzuki and he told me

the same for what i asked him and explained him.

Do you have install the proper belt? The width is ok?

If you have done this , then the only thing left is to make it tight.

Please Log in or Create an account to join the conversation.

Time to create page: 0.130 seconds
Joomla template by a4joomla