A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Jimny randomly juddering
- DAM0
- Topic Author
- Visitor
-
Public
11 May 2011 09:26 #16193
by DAM0
Jimny randomly juddering was created by DAM0
Hey all,
Got a problem hope someone can help ><
When driving, the car will randomly get a slight loss of power and bounce around for a few seconds, the rev counter at this points goes crazy then all goes back to normal. At first we thought nothing of if but seems to be getting worse and worse.
Recently had the headgasket looked at as the motor was loosing water but that has been resolved as well as a new o2 sensor into the manifold.
Any ideas?? its just becoming a nightmare to drive!
Damo.
Got a problem hope someone can help ><
When driving, the car will randomly get a slight loss of power and bounce around for a few seconds, the rev counter at this points goes crazy then all goes back to normal. At first we thought nothing of if but seems to be getting worse and worse.
Recently had the headgasket looked at as the motor was loosing water but that has been resolved as well as a new o2 sensor into the manifold.
Any ideas?? its just becoming a nightmare to drive!
Damo.
Please Log in or Create an account to join the conversation.
11 May 2011 09:30 #16194
by ooky_123
Former owner of Little "Ooky", who has now started a new life in Shetland
Replied by ooky_123 on topic Re: Jimny randomly juddering
Crank / Cam Sensors are breaking down.
easy to fit yourself .. martin sells the replacment parts on here... try to identify the sensor that is at fault or swap out both ... £50 ish each
easy to fit yourself .. martin sells the replacment parts on here... try to identify the sensor that is at fault or swap out both ... £50 ish each
Former owner of Little "Ooky", who has now started a new life in Shetland
Please Log in or Create an account to join the conversation.
11 May 2011 11:38 #16197
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re: Jimny randomly juddering
I sort of sell the parts 
My distributor proudly announced their availability, gave me the prices and an application chart and I have listed them. Tried to actually buy them today......not available as there is no demand!!
Trying to find another source this afternoon but its not looking too good.

My distributor proudly announced their availability, gave me the prices and an application chart and I have listed them. Tried to actually buy them today......not available as there is no demand!!
Trying to find another source this afternoon but its not looking too good.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- doncarlyon
- Visitor
-
Public
11 May 2011 19:27 #16213
by doncarlyon
Replied by doncarlyon on topic Re: Jimny randomly juddering
Please Log in or Create an account to join the conversation.
- doncarlyon
- Visitor
-
Public
12 May 2011 12:46 - 13 May 2011 05:20 #16223
by doncarlyon
Replied by doncarlyon on topic Re: Jimny randomly juddering
Asked the question... here is the answer!
Cam sensor £49.75
Crank sensor £55.93
6-8 weeks lead time.
Cam sensor £49.75
Crank sensor £55.93
6-8 weeks lead time.
Last edit: 13 May 2011 05:20 by doncarlyon.
Please Log in or Create an account to join the conversation.
- Keefe
- Visitor
-
Public
12 May 2011 13:05 #16225
by Keefe
Replied by Keefe on topic Re: Jimny randomly juddering
I've got one of the sensors sat in my garage as a spare.
Snag is, I can't remember if it's the cam or crankshaft.
It could be up for a loan if you want?
Snag is, I can't remember if it's the cam or crankshaft.
It could be up for a loan if you want?
Please Log in or Create an account to join the conversation.
Time to create page: 0.145 seconds